切換到寬版
  • 廣告投放
  • 稿件投遞
  • 繁體中文
    • 2110閱讀
    • 1回復

    [原創]SYNOPSYS™15.51 版本發布 [復制鏈接]

    		 上一主題 下一主題
    離線optics1210
     
    發帖
    476
    光幣
    317
    光券
    0
    只看樓主 倒序閱讀 樓主  發表于: 2019-01-18
    The update to version 15.51 incorporates the following changes: {^T_m)|n  
    m8T< x>  
    Features: tl=H9w&@  
    1.  DSEARCH now has a FILTER directive, which lets you specify that certain elements should be either positive or negative, while the others can be either.  If you know what a portion of your lens should look like, you can specify it this way -- and shorten the search time by a factor of two for each element so declared. *QGyF`Go{  
    2.  SYNOPSYS now has a STEP file converter.  There are limitations, however, which you can read about in the UM. NT0im%  
    nI es}n:  
    Bugs Fixed: Y'{F^VxA/  
    1.  The sequence IFR ... / IFP ... did not work if COMMON was requested. H{BP7!t[V  
    2.  ARG did not work properly with plastic elements. Q,m&XpZ  
    3.  Index values varied with GLM did not let the value of Nd rise above 1.9, even if you specified a higher limit with the CUL and FUL directives. W5^<4Ya!  
    [ 此帖被optics1210在2019-01-20 11:31重新編輯 ]
     
    分享到
    離線optics1210
    發帖
    476
    光幣
    317
    光券
    0
    只看該作者 1樓 發表于: 2019-01-20
    每一個新版可以實時加入客戶要求的功能，反饋過程大約24小時左右，加入功能從一周到幾周不等。